+8615824687445
Home / Knowledge / Details

Oct 20, 2026

NM600 Wear-Resistant Steel Plate Properties and Applications

 

What is NM600 Wear-Resistant Steel Plate?

 

‌NM600 Abrasion Resistant Steel Plate‌ is a premium high-strength wear plate with a nominal Brinell hardness rating of 600 HBW, engineered to deliver exceptional abrasion resistance and reliable performance under high-impact operating conditions.

 

Widely specified across mining, construction, and bulk material handling equipment, it serves as an ideal upgrade for components subjected to severe abrasive wear - including crusher liners, cutting edges, and loader buckets - and delivers a significantly extended service life when compared to conventional lower-hardness wear-resistant steel grades.

 

nm 600 steel plate

 

Contact Us Now for the Latest NM600 Price Quote!

 

 

Delivery Condition: Quenched and tempered (Q&T)

Available Specifications: Thickness: 4.0–25.0 mm; Width: 1,000–2,050 mm

 

 

Chemical Composition Analysis of NM600 Wear-Resistant Steel Plate

 

 

Element Typical Range (%)
Carbon (C) 0.40 – 0.50
Manganese (Mn) 1.00 – 1.90
Chromium (Cr) 1.00 – 1.50
Nickel (Ni) 0.50 – 1.50
Molybdenum (Mo) 0.50 – 0.80
Boron (B) 0.005 – 0.006
CEV (Carbon Eq.) ≥ 0.75

 

 

Mechanical Properties Analysis of NM600 Wear-Resistant Steel Plate

 

 

Property NM600 / AR600 (Ultra-Hard)
Brinell Hardness (HBW) 570 – 640 (Nominal 600)
Yield Strength (MPa) ≥1300
Tensile Strength (MPa) ≥1600
Elongation (%) ≤6
Impact Energy (-20°C) Very Low / Not Guaranteed
Wear Life (vs. NM400) 2.5x – 3.0x

 

 

NM600 High-Strength Wear-Resistant Steel Processing Precautions

 

 

NM600 is an ultra-high-strength wear-resistant steel. It is generally not suitable for bending applications. The following precautions should be observed during drilling, tapping, and cutting.

 

1. Drilling Precautions

  • Tool Selection: Use carbide drills, such as YG-series carbide tools, or ceramic drills. Avoid conventional high-speed steel (HSS) drills to minimize excessive tool wear.
  • Cutting Parameters: Use a lower spindle speed (500–800 rpm as a preliminary reference) and increase the feed rate as appropriate to reduce frictional heat generated between the drill and the material.
  • Cooling Method: Apply sufficient emulsion or extreme-pressure cutting fluid to prevent drill overheating and loss of hardness.
  • Positioning: Mark the drilling position with a center punch before drilling to prevent the drill from slipping or wandering.

 

NM600 Wear Resistant Steel Plate Supplier | 600 HB

 

2. Tapping Precautions

  • Tap Selection: Use cobalt-alloy HSS taps or carbide taps. A 6H thread tolerance class is recommended for internal threads where applicable to ensure proper fit.
  • Pilot Hole Diameter: Calculate the tap-drill diameter according to the thread specification. For example, an M10 metric thread with a standard coarse pitch of 1.5 mm typically requires an 8.5 mm tap-drill diameter. An undersized pilot hole may cause tap breakage.
  • Tapping Operation: During manual tapping, keep the tap perpendicular to the workpiece and reverse it by approximately 1/4 turn after each full turn to help break and remove chips. For machine tapping, use a reduced spindle speed (100–200 rpm as a preliminary reference) and apply suitable tapping oil.
  • Chip Removal: Remove metal chips from the hole regularly during tapping to prevent chip accumulation, which can cause tap chipping or breakage.

 

3. Cutting Precautions

 

Cutting Methods

  •  Mechanical Cutting: Use a circular saw or band saw fitted with carbide-tipped blades. A rotational speed of 200–400 rpm may be used as a preliminary reference, with a consistent feed rate. Actual parameters should be adjusted according to the equipment, blade diameter, and plate thickness.

 

  • CNC Cutting: Plasma or laser cutting may be considered, depending on plate thickness, dimensional requirements, and available equipment. For plasma cutting, parameters such as cutting current (150–200 A) and gas pressure (0.5–0.6 MPa) must be selected according to the cutting system and material thickness. For laser cutting, focus settings and spot size should follow the equipment manufacturer's recommendations.

 

Cooling and Personal Protection

During cutting, use compressed air or an appropriate cooling method where compatible with the cutting process to help control heat accumulation and the heat-affected zone. Operators must wear suitable protective equipment, including safety glasses and protective gloves, to reduce the risk of injury from sparks and hot material.

 

Stress Relief and Crack Prevention

For thick plates or applications with a high risk of cutting-induced cracking, preheating to 100–150°C may be considered only after evaluating the material manufacturer's recommendations and the applicable cutting procedure. After cutting, control the cooling process as required to reduce the risk of cracking.

 

Important: The cutting speeds, feed rates, cooling methods, and preheating temperatures above are preliminary references, not universal requirements for NM600. Actual machining parameters should be verified against the plate manufacturer's technical guidance, plate thickness, equipment specifications, and workshop trials before production.

 

NM600 Wear Resistance Steel Plate

  

 

Applications of NM600 Wear-Resistant Steel Plate

 

 

1. Mining and Mining Equipment

  • Ore Chutes and Hoppers: Liners that withstand high-intensity material flows and massive impacts.
  • Excavator Buckets: Used to reinforce bucket blades, side plates, and bottom to prevent wear from hard rock.
  • Crusher Components: Hammers, liners, impact plates, and blades of crushers, effectively resisting impact and wear.
  • Screening Equipment: Screen plates for ore screening.

 

2. Metallurgical Equipment

  • Coke Chutes: Chute liners for transporting high-temperature, hard coke.
  • Sintering Machine Components: Components that withstand high temperatures and wear.
  • Unloading Equipment: Blast furnace hoppers, chutes, etc.

 

3. Construction Machinery

  • Bucket Liners: Components for heavy-duty excavators and loaders.
  • Cement Mixer Blades: Mixing and agitating components that resist high wear.
  • Mixing Plant Wear-Resistant Liners

 

High Hardness NM550 / NM600 Steel Plate

 

 

Why Choose GNEE STEEL as Your NM600 Wear-Resistant Steel Plate Supplier?

 

 

1. GNEE collaborates deeply with leading domestic steel mills, possessing priority scheduling rights to guarantee supply during peak periods.

 

Characteristics of NM600 wear plate

 

2. To improve our customers' loading and unloading efficiency, our packaging details fully consider practical operational needs. The bottom of each steel plate is equipped with a thickened wooden pad or a customized steel pallet, with standard forklift/overhead crane lifting holes. The robust binding design prevents slippage during transportation, ensuring the safety of goods and personnel throughout the entire logistics process.

 

nm 600 steel plate

 

Contact Us Now for the Latest NM600 Price Quote!

 

FAQ:

How does abrasion resistance compare between NM550 and NM600?
NM600 provides superior abrasion resistance compared to NM550 due to its higher surface hardness (approx. 600 HBW vs. 550 HBW), making it better suited for extreme wear environments. However, NM550 offers a better balance of toughness and wear resistance, making it more reliable in scenarios involving both heavy impact and sliding abrasion.

 

How does hardness differ between NM550 and NM600?
NM550 and NM600 are both high-hardness abrasion-resistant steel plates, but they differ primarily in their Brinell hardness range and wear life. NM600, with a higher rating of 570–625 HBW, provides better wear resistance for severe abrasive environments compared to the 530–580 HBW of NM550, though NM600 is less common and harder to weld.


Which grade is easier to weld, NM500 or NM550?
NM500 is generally easier to weld than NM550.While both are high-strength, wear-resistant steels (NM series) that require strict, specialized welding procedures to avoid cracking, NM500 has a lower hardness and slightly lower carbon/alloy content, which improves its weldability compared to the more brittle and harder NM550.

 

Which is better for mining liners?
It depends on the wear mechanism. In NM550 vs NM500, NM550 is often better for severe abrasion-dominated liners, while NM500 may be safer in mixed wear and impact conditions.

 

Which is better for excavator buckets?
For NM550 vs NM500 in excavator buckets, NM500 is often better for mixed impact service, while NM550 is better for high-abrasion liner sections with controlled loading.

 

Is NM600 always the better choice because it is harder?
No, NM600 is not always the better choice just because it is harder. While higher hardness (NM600 vs. NM500 or NM400) directly translates to superior abrasion resistance, it comes with significant trade-offs, including reduced toughness, higher brittleness, and greater difficulty in fabrication.

 

How do service life expectations differ between NM550 and NM600?
NM600 wear-resistant steel provides a longer service life than NM550 under extreme, high-stress abrasion conditions, due to its higher hardness (approximately 600 HBW compared to 550 HBW for NM550). While both are classified as premium, high-hardness steels used for severe wear scenarios, NM600 is specifically designed for the most challenging environments where maximum abrasion resistance is required, whereas NM550 offers a slightly better balance of toughness.

You Might Also Like

Send Message