ASTM Corten A Corten B Corten Steel Plate
| ASTM Corten A weathering steel Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grade | C Max | SI | Mn | S Max | Cr | Ni | Cu | Nb | Nb+V=Ti |
| Corten A | 0.12 | 0.25-0.75 | 0.20-0.50 | 0.07-0.15 | 0.030 | 0.50-1.25 | 0.65 | 0.25-0.55 | - |
| ASTM Corten A corten material Mechanical Properties | |||||
|---|---|---|---|---|---|
| Grade | Permissible yield point ratio |
Yield Strength MPa(min) |
Tensile Strength MPa |
Elongation % (min) |
Bend |
| Corten A | - | 355 | 470-630 | 20 | 1t |
| Corten A corten weathering steel Weathering Steel Parameters | ||||||||
|---|---|---|---|---|---|---|---|---|
| Recommended Bending Radius without Special Requirments | ||||||||
| Thickness mm | 2-3 | 4 | 5 | 6 | 7 | 8 | 10 | 12 |
| Radius mm | 4 | 8 | 10 | 12 | 21 | 24 | 30 | 36 |
| ASTM Corten B weathering plate Chemical Composition | ||
|---|---|---|
| Grade/ Material | Element | Composition( Max-A, Min-I) |
| Corten B | C | A: 0.19 |
| Mn | 0.30-0.65 | |
| Si | 0.80-0.25 | |
| P | A:0.035 | |
| S | A:0.030 | |
| Al | 0.020-0.06 | |
| V | 0.02-0.10 | |
| Cu | 0.25-0.40 | |
| Cr | 0.40-0.65 | |
| Ni | 0.40 | |
| ASTM Corten B plate corten steel Mechanical Properties | ||
|---|---|---|
| Grade/Material | Tensile Test | Ksi/MPa |
| Corten B | Tensile Strength | I:485 |
| Yield Strength | I:345 | |
| Elongation | 19% | |
| Impact Test(if any) | ||
Hot Tags: weathering resistant steel plate, China weathering resistant steel plate manufacturers, suppliers, factory
