+8615824687445
Home / News / Content

Nov 18, 2026

Inconel 713LC Seamless Tube: Latest Price Introduction (2026)

Inconel 713C and Inconel 713LC are precipitation-hardened nickel-base superalloys, widely supplied as seamless tubes for high-temperature service. The core difference lies in carbon content, which changes ductility, thermal fatigue and pricing. In 2026, LME nickel price, vacuum melting requirement and non-standard seamless tube processing are the main drivers of their market quotation.

 

 

Contact us now to get the latest price list for Inconel 713C/713LC.

Inconel Prices 2026: Chart, Index, Trends & History
Inconel 713lc Stainless Seamless Piping
 

 

Inconel 713LC Seamless Tube Core Technical Difference Table

 

Item Inconel 713C Seamless Tube Inconel 713LC Seamless Tube
Carbon Content 0.08–0.20% Max 0.05% (Low Carbon, LC grade)
Standard AMS 5391, UNS N07713 AMS 5377, UNS N07713
Key Strength Higher creep rupture strength at constant high temperature Better ductility, superior thermal fatigue resistance
Typical Elongation ~5% 8–15%
Application Focus Turbocharger, small gas turbine hot parts Large turbine components, parts under cyclic thermal load

 

The low-carbon design of 713LC reduces carbide precipitation at grain boundaries, lowering the risk of cracking under repeated heating and cooling cycles. 713C delivers higher creep strength for steady-state high-temperature working conditions.

 

Inconel 713LC Seamless Tube 2026 Market Price Overview

 

here is no fixed unit price for these two seamless tubes. Both belong to high-grade cast superalloy, and seamless tube production has high processing difficulty.

 

  • Inconel 713C seamless tube: Base price is relatively lower than 713LC. It is preferred by buyers with stable budget and demand for static high-temperature creep performance.
  • Inconel 713LC seamless tube: Premium price. Vacuum melting + strict impurity control pushes up raw material and manufacturing cost. It usually carries 15%–25% price premium versus 713C for the same OD and wall thickness.

 

Important note: All quotations are subject to tube outer diameter, wall thickness, length, quantity, MTC 3.1 /3.2 certification, PMI & UT inspection requirement and delivery condition. Nickel surcharge from LME is adjusted monthly in 2026.

 

Key Factors Affecting Inconel 713LC Seamless Tube Quotation in 2026

 

  1. Raw material: Nickel, molybdenum, niobium and aluminum alloy surcharge; LME nickel fluctuation is the biggest variable.
  2. Seamless tube processing: 713 series is originally a casting superalloy. Tube piercing and extrusion are harder than common wrought nickel alloys, non-standard sizes add extra cost.
  3. Metallurgy route: Vacuum melted material costs more than air melt. Aerospace-grade inspection package raises price.
  4. Order volume: Small batch, cut-to-length orders have higher unit cost. Bulk orders get better unit price.

 

How to Choose Between 713C and 713LC Seamless Tube?

 

Pick Inconel 713C: Working under stable continuous high temperature, priority on creep rupture strength, limited thermal cycling, turbocharger and small gas turbine hot gas piping.

 

Pick Inconel 713LC: Components with frequent temperature rise & cooling cycles, anti-cracking requirement, high ductility demand, large turbine hot section tubes, aerospace cyclic service parts.

 

Inconel 713C vs Inconel 713LC:Chemical Composition Comparison Table

 

Element (wt%) Inconel 713C (AMS 5391) Inconel 713LC (AMS 5377) Note
C 0.08–0.20 ≤0.05 Core difference
Cr 12.0–14.0 11.0–13.0 Oxidation resistance
Mo 3.8–5.2 3.8–5.2 High temp strength
Nb 1.8–2.8 1.8–2.8 Precipitation hardening
Al 5.5–6.5 5.5–6.5 γ′ phase formation
Ti 0.5–1.0 0.5–1.0 Precipitation hardening
B 0.005–0.015 0.005–0.015 Grain boundary control
Zr 0.05–0.15 0.05–0.15 Casting performance
Ni Balance Balance Base matrix

 

Caption: The only major chemical distinction is carbon content. Higher carbon in 713C forms grain-boundary carbides for better creep rupture strength; low-carbon 713LC reduces carbide precipitation and avoids brittleness under thermal cycling.

 

Inconel 713C vs Inconel 713LC:Mechanical Properties Comparison Table

 

Property Inconel 713C Inconel 713LC
Tensile Strength (RT) ≥758 MPa ≥758 MPa
0.2% Yield Strength (RT) ≥689 MPa ≥689 MPa
Elongation (4D) ≥3% ≥6%
Creep rupture @982℃ /152MPa ≥30 h ≥30 h
Thermal fatigue resistance Standard Superior
Ductility & crack tolerance Lower Higher

 

Caption: Both grades share similar tensile and yield strength. 713LC delivers much better ductility and thermal fatigue resistance, which is critical for aerospace components under repeated heating and cooling cycles.

 

Inconel 713C / 713LC Seamless Tube Size Range Table

 

Item Inconel 713C / 713LC Seamless Tube
Outer Diameter (OD) 6 mm – 300 mm
Wall Thickness (WT) 0.8 mm – 25 mm
Standard Length 1000 mm – 6000 mm
Cutting Custom cut-to-length available
Form Seamless extruded tube (casting alloy, special piercing process)

 

 Caption: As cast nickel superalloy, not standard wrought alloy. We support non-standard OD and wall thickness against customer drawings.

 

Inconel 713C / 713LC Seamless Tube Dimensional Tolerance Table

 

Parameter Tolerance
Outer Diameter OD ±0.10 mm (OD ≤50mm); ±0.20 mm (OD>50mm)
Wall Thickness WT ±10% of nominal wall
Length +3 mm / -0 mm
Straightness ≤1.5 mm per meter
Ovality Within OD tolerance range

Caption: Tight aerospace tolerance available upon request. Witness inspection and dimensional report can be supplied together with MTC. 

 

Why Choose GNEE STEEL as Your Nickel Alloy Supplier?

 

  • Aerospace standard compliance: We strictly follow AMS 5391 & AMS 5377, full PMI, UT, mechanical test and metallurgy inspection before delivery. MTC 3.1 / 3.2 documents are available.
  • Specialized processing for 713 series: 713C /713LC are cast superalloys, hard to extrude into seamless tubes. We have stable piercing & extrusion route for these hard-to-form grades.
  • Full traceability: Every batch can be traced back to melting record, raw material and test report. Suitable for gas turbine, turbocharger and aerospace hot-section projects.
  • Custom service: Custom OD, wall thickness, fixed cutting, special tolerance and third-party witness inspection. Small batch trial order and bulk order are both acceptable.
  • Professional technical support: Our metallurgy team helps you select between 713C and 713LC according to your temperature cycle, creep requirement and budget. Send your drawing for formal quotation.

 

Full Range of Inconel 713C & 713LC Product Forms

 

Beyond seamless tubes, GNEE STEEL supplies multiple finished and semi-finished forms of Inconel 713C and Inconel 713LC to match your one-stop sourcing needs.

 

  • Plate / Sheet: Hot rolled & solution treated plate, available for blanking and machining of high-temperature structural parts.
  • Round Bar: Extruded and forged bar stock, widely used for fasteners, shafts and machined hot-section components.
  • Forged Flange: ASME B16.5 / B16.47 standard flanges, suitable for high-temperature piping connection systems.
  • Forged Ring: Rolled seamless rings with optimized grain flow, ideal for turbine casings and rotating component supports.
  • Forged Disc: Forged round blanks, ready for CNC machining into turbine wheels and circular high-temperature parts.
  • Forged Shaft: Open-die forged shaft blanks, for high-load rotating service under cyclic thermal conditions.

 

All these forms follow AMS 5391 / AMS 5377 specification, supported by PMI, UT, mechanical test and full material traceability. Send your drawing for quotation if you require mixed-form orders.

 

 

Nickel Alloy Tubes: Welded or Seamless

Inconel 713C & 713LC Plate / Sheet

Inconel 713LC round bar

Inconel 713C & 713LC Round Bar

INCONEL 713L Material Data Sheet

Inconel 713C & 713LC Forged Flange

Nickel Alloy pipe

Inconel 713C & 713LC Forged Ring

Inconel 713LC Alloy – Composition, Properties, and Uses

Inconel 713C & 713LC Forged Disc

Nickel Alloy Tubes: Welded or Seamless

Inconel 713C & 713LC Forged Shaft

Request a Quote

FAQ:

Q:What is Inconel 713?

 

A:Inconel 713 (commonly known as Inconel 713C or UNS N07713) is a precipitation-hardenable, nickel-chromium-based cast superalloy designed to maintain exceptional strength, creep resistance, and oxidation stability at high temperatures up to 982°C (1800°F).

 

Q: Can I use Inconel 713C instead of Inconel 718 in welding applications?

A: No. Inconel 713C is prone to cracking during welding. If your project requires a large amount of welding, Inconel 718 is recommended.

 

Q: Which alloy is more cost-effective?

A: Inconel 718 is generally readily available and widely used, making it more cost-effective for most structural components. 713C is designed for castings with complex shapes.

 

Q: Does GNEE offer third-party inspection services?

A: Yes! We support inspections by third-party inspection agencies such as SGS, TUV, or BV to ensure products meet your technical specifications.

 

Q: Why is Inconel 718 difficult to machine?

A: Inconel 718 nickel-based superalloys exhibit excellent performance at high temperatures, thus finding wide application in the aerospace, marine, and automotive industries. However, Inconel 718's poor thermal conductivity and rapid strain hardening characteristics result in poor machinability and poor surface finish.

 

Q: What is the melting point of Inconel 718?

A: The melting point range of Inconel 718 is 1260-1340°C (2300-2440°F).

You Might Also Like

Send Message