AMS 5662 Inconel 718 solution heat treated round bar is a nickel-based superalloy product used in aerospace, gas turbines and demanding industrial applications. Manufactured from UNS N07718 alloy, it is supplied in a solution heat treated condition and designed for components that require high strength, corrosion resistance and controlled heat-treatment response.
AMS 5662 specifies requirements for chemical composition, melting practice, heat treatment, mechanical testing and product quality. Buyers selecting this material should confirm the standard revision, bar dimensions, surface condition and inspection requirements before placing an order.
Request A Quote For AMS 5662 Inconel 718 Round Bar

What Is AMS 5662 Inconel 718 Round Bar?
AMS 5662 is an SAE aerospace material specification covering corrosion- and heat-resistant nickel alloy bars, forgings and flash welded rings in the solution heat treated condition. The alloy is commonly identified as Inconel 718 or UNS N07718.
The specification requires controlled melting practices, including consumable electrode remelting or vacuum induction melting under the specified conditions. It also defines chemical composition, heat treatment, testing and reporting requirements.
For round bar buyers, AMS 5662 is important because it provides a consistent material specification for components that will undergo further machining and, where required, precipitation heat treatment.
What Does Solution Heat Treated Condition Mean?
Solution heat treatment is an important stage in manufacturing Inconel 718. During this process, the material is heated to dissolve or redistribute strengthening elements within the nickel-based matrix, followed by controlled cooling.
AMS 5662P specifies a solution heat-treatment temperature range of 1725–1850°F (941–1010°C), with a nominal temperature of 1775°F (968°C). The holding time depends on the product's cross-sectional thickness, and cooling must be at a rate equivalent to air cooling or faster.
The supplied material is not the same as fully precipitation-aged AMS 5663 material. AMS 5662 round bar is supplied in the solution heat treated condition, with heat-treatment response requirements used to verify its ability to develop the specified properties after subsequent aging.
AMS 5662 vs. AMS 5663 Inconel 718 Bar
| Comparison | AMS 5662 | AMS 5663 |
|---|---|---|
| Heat-treatment condition | Solution heat treated | Solution and precipitation heat treated |
| Delivery condition | Not precipitation aged | Aged condition |
| Main purchasing consideration | Subsequent machining and heat treatment | Properties after aging |
| Typical application requirement | Components requiring further processing | Components requiring specified aged properties |
Buyers should select the specification according to the component drawing and final mechanical-property requirements, rather than treating the two standards as interchangeable.
Chemical Composition of AMS 5662 Inconel 718
The chemical composition of Inconel 718 directly affects its strength, oxidation resistance and corrosion performance. Nickel forms the main alloy matrix, while niobium, chromium, molybdenum, titanium and aluminum contribute to the alloy's overall properties.
| Element | Composition (wt.%) |
|---|---|
| Nickel (Ni) | 50.00–55.00 |
| Chromium (Cr) | 17.00–21.00 |
| Molybdenum (Mo) | 2.80–3.30 |
| Niobium (Nb) | 4.75–5.50 |
| Titanium (Ti) | 0.65–1.15 |
| Aluminum (Al) | 0.20–0.80 |
| Iron (Fe) | Balance |
Nickel provides the base structure and supports high-temperature performance. Chromium contributes to oxidation and corrosion resistance, while molybdenum improves resistance in certain corrosive environments.
Niobium is particularly important because it contributes to precipitation strengthening through the formation of γ″ phases during heat treatment. Titanium and aluminum also participate in the strengthening system. Strict chemical composition control is therefore essential for achieving consistent material properties.
Mechanical Properties of AMS 5662 Inconel 718 Round Bar
According to SAE AMS 5662P, Inconel 718 round bars are supplied in the solution heat treated condition. The delivered material has a maximum hardness of 277 HB. Tensile properties are verified after the specified precipitation heat-treatment response cycle.
| Mechanical Property | Requirement |
|---|---|
| Hardness (As Solution Heat Treated) | ≤ 277 HB |
| Tensile Strength (Room Temperature, Transverse) | ≥ 1241 MPa |
| Yield Strength (0.2% Offset, Transverse) | ≥ 1034 MPa* |
| Elongation (4D, Transverse) | ≥ 6% |
| Reduction of Area (Transverse) | ≥ 8% |
| Tensile Strength at 649°C (Transverse) | ≥ 965 MPa |
| Yield Strength at 649°C (0.2% Offset, Transverse) | ≥ 862 MPa* |
For transverse bar specimens, the minimum yield strength is 1034 MPa for diameters up to 127 mm and 1000 MPa for diameters over 127 mm up to 254 mm at room temperature. At 649°C, the corresponding minimum values are 862 MPa and 841 MPa.
Note: Tensile properties shown above are measured after the specified precipitation heat-treatment response cycle, not in the as-delivered solution heat treated condition. Actual acceptance requirements depend on the applicable AMS revision, product dimensions and specimen orientation.
Applications of AMS 5662 Inconel 718 Round Bar
Inconel 718 combines high strength, fatigue resistance and corrosion resistance. Its precipitation-hardening characteristics make it suitable for components exposed to mechanical loads and elevated temperatures.
- Aerospace Engine Components: Round bar can be machined into shafts, fasteners, spacers and other engine components requiring controlled material properties.
- Gas Turbine Components: The alloy is used in selected turbine hardware, including shafts, bolts and structural components exposed to heat and mechanical stress.
- High-Temperature Fasteners: Inconel 718 is suitable for bolts, studs and other fastening components requiring high strength and resistance to stress relaxation.
- Oil and Gas Equipment: Depending on the design conditions and applicable specifications, the alloy can be used for selected valve components, shafts and downhole equipment.
- Precision-Machined Parts: Solution heat treated round bar can be used as a starting material for components that require machining before final heat treatment.
The suitability of Inconel 718 for a particular component must be confirmed against its operating temperature, stress conditions, environment and design specification.
AMS 5662 Inconel 718 Round Bar Price List
The price of AMS 5662 Inconel 718 round bar depends on diameter, order quantity, surface finish, heat-treatment requirements, inspection scope and delivery terms. Larger diameters, precision machining and additional testing can increase the final cost.
The following table can be used as a quotation reference structure. Actual prices should be confirmed against current stock, production conditions and buyer specifications.
| Diameter (mm) | Condition | Surface | Price |
|---|---|---|---|
| 20–50 | Solution Heat Treated | Black / Peeled | Request a Quote |
| 50–100 | Solution Heat Treated | Peeled / Turned | Request a Quote |
| 100–150 | Solution Heat Treated | Turned | Request a Quote |
| 150–250 | Solution Heat Treated | Turned / Rough Machined | Request a Quote |
| Custom Sizes | As Specified | Customized | Request a Quote |
To receive an accurate quotation, buyers should provide the required diameter, length, quantity, surface condition, standard revision and inspection requirements.
Other Available Forms of Inconel 718 Alloy
In addition to Inconel 718 round bars, GNEE can provide other product forms for different engineering and manufacturing requirements. Each product form should be supplied according to its applicable material specification and agreed delivery condition.
| Product Form | Typical Applications |
|---|---|
| Inconel 718 Round Bar | Shafts, fasteners and machined components |
| Inconel 718 Forged Ring | Ring-shaped structural and mechanical components |
| Inconel 718 Forged Round Disc | Turbine discs and other disc-shaped components |
| Inconel 718 Plate and Sheet | Structural parts and machined plate components |
| Inconel 718 Seamless Tube | Specialized tubular components, subject to applicable specifications |
For forged rings and round discs, buyers can provide the outside diameter, inside diameter, thickness or height, quantity and technical drawings. For plates and tubes, the required dimensions, applicable standard and delivery condition should be confirmed separately.
AMS 5662 should not automatically be applied to every product form. The relevant specification must be selected according to the product type and purchase requirements.
GNEE supplies Inconel 718 products for customers requiring specified dimensions, material conditions and inspection documentation. We can review round bar requirements as well as inquiries for forged rings, forged round discs, plates, sheets and other product forms.




Why Choose GNEE STEEL as Your Inconel 718 Round Bar Supplier?
Inconel 718 Round Bar Stock
GNEE STEEL provides Inconel 718 round bars in various diameters and delivery conditions. Buyers can inquire about available stock, specifications and quantities to evaluate material availability and reduce unnecessary procurement lead times.

Customized Processing Services
We offer customized processing options according to your drawings and project requirements, including cutting to length, turning, grinding and machining. Specify the required diameter, length, dimensional tolerances and surface finish when requesting a quotation.

Product Quality Inspection
Each order can be inspected according to the agreed technical specifications and applicable standards. Inspection options may include chemical composition analysis, tensile testing, hardness testing, ultrasonic testing and dimensional inspection, with EN 10204 3.1 inspection certificates available upon agreement.

Packaging and International Shipping
Inconel 718 round bars are protected with compatible VCI anti-corrosion materials and sealed PE waterproof wrapping. For long-distance transport and sea freight, desiccants and moisture indicators can be added. Pallets, fumigated wooden crates or steel frames provide outer protection against impact and handling damage.

Request A Quote For AMS 5662 Inconel 718 Round Bar
Contact GNEE for AMS 5662 Inconel 718 round bar pricing and availability. Send us your specifications to review the material requirements and discuss a suitable supply solution.
FAQ:
1. What Sizes Are Available for AMS 5662 Inconel 718 Round Bar?
AMS 5662 covers bars up to 10 inches (254 mm) in nominal diameter or thickness. Actual availability depends on stock, manufacturing capacity and required dimensions. Contact GNEE with your diameter and length requirements.
2. What Is the Difference Between AMS 5662 and AMS 5663 Inconel 718 Round Bar?
AMS 5662 round bar is supplied in the solution heat treated condition, while AMS 5663 covers solution and precipitation heat treated material. Choose the specification according to your component's required delivery condition and mechanical properties.
3. Does AMS 5662 Inconel 718 Round Bar Require Aging After Machining?
AMS 5662 material is supplied in the solution heat treated condition and is not precipitation aged. Components may undergo precipitation heat treatment after machining when required by the drawing or application specification.
4. What Inspection Documents Are Available for AMS 5662 Inconel 718 Round Bar?
Inspection documentation can include an EN 10204 3.1 certificate with chemical composition and applicable test results. Hardness, tensile testing, ultrasonic testing and dimensional inspection can be arranged according to the purchase requirements.
5. What Is the Price of AMS 5662 Inconel 718 Round Bar?
The price depends on bar diameter, length, order quantity, surface finish, heat treatment, inspection requirements and delivery terms. Send GNEE your specifications and quantity to receive a quotation.

