-
AH36, DH36, EH36 FH36 Steel Plate For ShipbuildingRead More
Shipbuilding steel plate refers to carbon steels for offshore and marine constructions, grades in A, B, D, E, AH32/36/40, DH32/36/40, & EH32/36/40.
-
ASTM A537 Pressure Vessel PlatesRead More
High -strength heat-treated ASTM A537 PVQ steel plate is ideal for both boilers & pressure vessels.
-
G550 Galvanized CoilRead More
Galvanized coil G550 belongs to high-strength series galvanized sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength
-
DX51D Galvanized CoilRead More
DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low
-
Hot-dip Galvanised SteelRead More
Hot-dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment.
-
ST12 Cold Rolled Steel SheetRead More
ST12 is German standard (DIN1623), It's ordinary cold rolled steel. In principle, ST12 can only be bent and formed, and no stamping is allowed.
-
SPCC Steel SheetRead More
SPCC steel is a cold-rolled steel sheet or strip for general uses (JIS), equivalent to Q195, Q215A, St12, DC01, etc. Get more details here!
-
DC07 | 1.0898 Mild Steel SheetRead More
DC07 is therefore particularly suitable for difficult deep-drawing and stretch-forming parts such as side walls, oil pans and bottom plates.
-
DC06 1.0873 Cold Rolled Steel SheetRead More
Cold rolled steel sheet is cut from cold rolled sheet coil. The basematerial is non-alloy low carbon steel, the availability of thickness is0.12mm to 3mm (11gauge to 36gauge). The coil width is 500mm
-
DC04 | 1.0338 Mild Low-Carbon SteelRead More
DC04 is mainly used for deep drawing and simple metal stamping parts of daily necessities, such as auto parts, electrical products and other products with high ductility requirements.
-
DC01 | 1.0330 Cold-rolled SheetRead More
DC01 – This grade can be used for simple forming work, for example Bending, embossing, beading and pulling are used
-
Cold Rolled Carbon Steel SheetRead More
Generally, cold rolled steel sheet can hold tighter tolerances than hot rolled when machined or otherwise fabricated, providing a better overall surface finish.




