S460NL is a kind of High-Strength Low-Alloy Steel Plate with Yield Strength of 460-1035 MPa
Grade: S460NL
S460NL Structural Steel Delivery Condition:
S460NL plates are usually delivered in a normalized condition, but they can also undergo normalization, tempering, or quenching and tempering upon customer request. Plates can be delivered by shearing or flame cutting as needed.
S460NL Structural Steel Plate Dimensions and Specifications:
Thickness: Generally between 8mm and 300mm (with some references suggesting that the thickness of S460 grade plates does not exceed 200mm).
Width: Ranges from 1500mm to 4020mm.
Length: Customizable to meet client specifications.
S460NL steel Standard:
The S460NL steel plate is produced according to the EN10025-3 standard.
| Grade : | S460NL | ||
| Number: | 1.8903 | ||
| Classification: | Alloy special structural steel | ||
| Standard: |
|
Equivalent grades of steel S460NL (1.8903)
| EU EN |
Germany DIN,WNr |
France AFNOR |
England BS |
European old EN |
Italy UNI |
China GB |
| S460NL |
TStE460 |
E460FP |
55EE |
FeE460KTN |
FeE460KTN |
Q460E |
S460NL steel Heat Treatment Condition:
Delivered in a normalized or normalized-rolled condition, S460NL can be customized to include ultrasonic testing standards, specific testing grades, alloy element composition control, and thickness direction performance (Z-direction performance, e.g., S460NLZ35) if required.
Hot rolled Normalized or Normalized rolled welded fine grain structural steels
S460NL steel product available : S460NL Steel plates, S460NL steel sheets, S460NL Steel coil, S460NL Steel strip, S460NL Steel sections, S460NL Steel bars, S460NL Steel rods
Chemical Composition For S460NL Structural Steel Plates
|
C |
Si |
Mn |
P |
S |
Altotal * |
N |
Cr |
|
0.20 |
0.60 |
1.00-1.70 |
0.025 |
0.020 |
0.020 min |
0.025 |
0.30 |
|
Cu ** |
Mo |
Nb |
Ni |
Ti |
V |
Nb+Ti+V |
Mo+Cr |
|
0.55 |
0.10 |
0.05 |
0.80 |
0.05 |
0.20 |
0.22 |
0.30 |
Mechanical Property For S460NL Structural Steel Plates
|
Product Thickness |
Yield Strength MPa |
Tensile Strength MPa |
Elongation |
|
up to 16 mm |
460 min |
540 to 720 |
17 min |
|
16 to 40 mm |
440 min |
540 to 720 |
17 min |
|
over 40 to 63 mm |
430 min |
540 to 720 |
17 min |
|
over 63 to 80 mm |
410 min |
540 to 720 |
17 min |
|
over 80 to 100 mm |
400 min |
540 to 720 |
17 min |
|
over 100 to 150 mm |
380 min |
530 to 710 |
17 min |
|
over 150 to 200 mm |
370 min |
530 to 710 |
17 min |
