As a procurement professional, your goal is to strike a balance between technical compliance and cost-effectiveness. In the high-temperature nickel alloy market, Nimonic 75 (UNS N06075) is a critical component for aerospace maintenance, repair, and overhaul (MRO) as well as industrial heating. This professional review provides you with an authoritative procurement guide to help you optimize your supply chain, reduce risks through MTC 3.1 traceability, and find high-quality Nimonic 75/EI435 alternatives from China.
Click to get a quote for GH3030 now
Professional purchasing review and buying guide for Nimonic 75
Professional purchasing review and buying guide for Nimonic 75
Nimonic 75 is an 80/20 nickel-chromium alloy strengthened by the addition of titanium and carbon. It is a solid solution strengthened high-temperature superalloy designed for high-temperature static applications, exhibiting excellent oxidation resistance, scale resistance, and good mechanical strength.
What is the chemical composition of NIMONIC 75?
Nimonic 75 (UNS N06075) is an 80/20 nickel-chromium alloy. Its main component is nickel, with a chromium content of 18.0%–21.0%, and small amounts of titanium and carbon. It possesses excellent oxidation resistance and high-temperature strength, and is commonly used in gas turbines and furnace components. It also contains small amounts of iron, silicon, and manganese.
1. Key chemical composition (%) of Nimonic 75 alloy
| Nickel (Ni) | Chromium (Cr) | Titanium (Ti) | Iron (Fe) | Standards Compliance |
| Balance (≥75.0) | 19.0 - 22.0 | 0.15 - 0.35 | ≤ 1.50 | ASTM B637, GB/T 14992, EI435 |
2. Mechanical properties of Nimonic 75 alloy (annealed state)
| Value | Significance | |
|---|---|---|
| Tensile Strength (Rm) | ≥ 685 MPa | Ensures structural safety under thermal stress |
| Ductility (Elongation A5) | ≥ 35% | Critical for sourcing sheets intended for deep-drawing |
| Yield Strength (Rp 0.2) | ≥ 275 MPa | – |
Click to download the GH3030 alloy PDF file now
3. Nimonic 75 Alloy Supply Shapes and Sizes
We offer a comprehensive supply of Nimonic 75 materials to meet the needs of large-scale production and emergency aerospace MRO.
| Product Form | Standard Size Range | Surface Condition |
| Round Bars & Rods | Φ 6.0mm – Φ 250mm | h9 Bright Ground / Peeled / Forged |
| Sheets & Plates | 0.5mm – 50.0mm | Cold Rolled (Thin) / Hot Rolled (Thick) |
| Seamless Tubing | OD 6mm – 114mm | Bright Annealed (BA) / Pickled (AP) |
4. Three-Step Method for Reducing Procurement Risk
Step 1: Verify the Melting Process
High-quality Nimonic 75 must be produced using a vacuum induction melting (VIM) + electroslag remelting (ESR) process. Request furnace records from the supplier. This ensures ultra-low sulfur content and zero macroscopic segregation.
Step 2: Check Certification (MTC 3.1)
Ensure the factory test certificate complies with EN 10204 3.1. The certificate must include the furnace number, chemical composition analysis, grain size, and mechanical property test results at room temperature and high temperature.
Step 3: Mandate Non-Destructive Testing
For round bars and tubes, 100% ultrasonic testing (UT) and eddy current testing (ET) should be mandatory. This avoids the high costs associated with discovering internal voids after processing the steel bars.
Gnee Steel GH3030 certificate
Contact us now to get the latest export price for GH3030 in 2026
FAQ
Q1: Can Nimonic 75 be used as a drop-in replacement for Russian EI435 (ЭИ435)?
A: Yes. In fact, most Aerospace MRO facilities in India and the CIS countries use them interchangeably. Our GH3030 / Nimonic 75 equivalent is manufactured specifically to bridge this standard gap, providing identical oxidation resistance up to 800°C.
Q2: Why is the China factory-direct price 30-40% lower than Western stockists?
A: By eliminating international middleman markups and sourcing directly from a China superalloy factory, you benefit from optimized local production costs and massive industrial scale, without compromising on ASTM or AMS standards.
Q3: What is the lead time for a wholesale order?
A: We maintain a massive stock of standard sizes for immediate global dispatch (7-10 days). Custom fabrication or non-standard sizes typically require 30-45 days.