We are proud to introduce our company, Gnee Steel, a renowned manufacturer, exporter, and supplier of Inconel 718 flanges. Gnee Steel's Inconel 718 flanges are made from high-quality nickel alloy and manufactured efficiently using advanced production processes.
These 718 alloy flanges are widely used in the transport of liquids and other fluids across various industries. Inconel 718 pipe flanges and 718 sliding flanges offer excellent machinability and weldability, achieving good weld results with or without welding wire. Gnee Steel offers Inconel 718 pipe flanges in a variety of sizes, specifications, and thicknesses.
Learn about Inconel 718 Slip On flanges

Learn about Inconel 718 Slip On flanges
Inconel 718 flanges are high-performance nickel-chromium-molybdenum alloy components designed for extreme environments, offering exceptional strength and oxidation resistance, withstanding temperatures up to 705°C (1300°F). They are manufactured using a precipitation hardening process, ensuring high tensile strength, creep resistance, and ductility. These flanges are critical in the aerospace (turbine engines), oil and gas, and nuclear industries.
Why is Inconel 718 difficult to machine?
Inconel 718 nickel-based superalloys exhibit excellent properties at high temperatures, making them widely used in the aerospace, marine, and automotive industries. However, Inconel 718 has poor thermal conductivity and is prone to rapid strain hardening, resulting in poor machinability and poor surface finish.

Inconel 718 sliding flanges offer excellent corrosion resistance, oxidation resistance, and high-temperature resistance. They are widely used in various industries, including aerospace, chemical, power generation, and oil and gas. Common applications for Inconel 718 sliding flanges include pipe fittings, heat exchangers, and valves.
One of the main advantages of Inconel 718 sliding flanges is their superior corrosion resistance and oxidation resistance under high-temperature and high-pressure environments. Compared to other materials, they also offer superior corrosion resistance and oxidation resistance. Inconel 718 sliding flanges are easy to install and offer a variety of connection options. They are compatible with a wide range of gasket materials and are suitable for a variety of chemicals and gases.
Inconel 718 sliding flanges require virtually no maintenance. They are self-healing and resistant to corrosion and abrasion. Regular cleaning and inspection of the flanges prevent damage and ensure optimal performance. If any signs of wear or damage are found, the flange must be replaced immediately.
![]()
Inconel 718 Slip On flanges
Specification of Inconel 718 Slip On Flanges
Equivalent Grades for Inconel 718 Slip On Flanges
| STANDARD | WERKSTOFF NR. | UNS |
| Inconel 718 | 2.4668 | N07718 |
Inconel 718 Slip On Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Mechanical Properties of Inconel 718 SORF Flanges
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Types of Inconel 718 Slip On Flanges


718 Sliding Flange Characteristics
Design: The inner diameter of the Inconel 718 sliding flange is slightly larger than the pipe, allowing it to "slide" into the pipe end. It is typically secured with two fillet welds (one on the inside and one on the outside).
Easy Installation: Because the Inconel 718 sliding flange is not directly welded to the pipe end like a welded neck flange, alignment is easier and precise pipe cutting is not required.
Suitable for Lower Pressure/Temperature Environments: Although 718 is a high-strength material, the sliding flange design is generally more suitable for low to medium pressure applications compared to welded neck or socket weld flanges.
Common Applications of Inconel 718 Flanges
Inconel 718 flanges are crucial in industries with extremely high requirements for reliability and stress resistance:
Aerospace: Jet engine components, rocket engines, and gas turbines.
Oil & Gas: Subsea pipelines, downhole equipment, and oil wells handling acid gases (H2S, CO2).
Power Generation: Nuclear reactors and steam generators.
Chemicals: Equipment handling corrosive substances.
Inconel 718 Flange Manufacturing and Standards
Specifications: Typically conforms to ASTM B564 (Standard Specification for Nickel Alloy Forgings) and ASME B16.5 standards.
Size Range: Typically available in sizes from 15NB (1/2") to 1200NB (48").
Surface Finishes: Available in various face types, including raised face (RF) or ring joint (RTJ).
Cold Working: Cold working before aging treatment can increase strength, but this increases machining difficulty.

Gnee Steel is a professional manufacturer of various nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel Alloy 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy Alloy 800, Incoloy 800H/HT, Incoloy 825, Monel Alloy 400, Monel K500, and high-temperature alloys. We specialize in the production and sales of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power, automotive, and nuclear energy industries, and we can provide customized alloy material solutions according to customer needs. For alloy material price inquiries or to request customized alloy material solutions, please feel free to contact us at ru@gneesteelgroup.com for a quote.


