1. Electrical Isolation
Insulating Materials: Use non-conductive gaskets (e.g., neoprene, PTFE) or plastic washers between metals.
Coating Protection: Apply paint or powder coating to both metals to block electrolyte contact (focus on the more noble/cathodic metal).
2. Material Selection
Avoid High-Risk Pairs:
| SMA490AW (Anodic) | Risk if Contacted With (Cathodic) |
|---|---|
| - | Stainless Steel (316, 304) |
| - | Copper/Brass |
| - | Aluminum (in salty environments) |
Sacrificial Anodes: Attach zinc or magnesium anodes to divert corrosion away from SMA490AW.
3. Design Solutions
Avoid Direct Contact: Separate metals using non-metallic spacers or design drainage paths to prevent electrolyte pooling.
Cathodic Protection: For critical structures, use impressed current systems (ICCP) in seawater/coastal zones.
4. Maintenance
Regular Inspections: Check for rust staining, coating damage, or pitting near joints.
Reapply Coatings: Repair damaged coatings promptly to maintain isolation.
When to Take Extra Care
Coastal/High-Salt environments accelerate galvanic corrosion.
Humid/Industrial areas with acid rain or pollutants.



