+8615824687445
Home / Knowledge / Details

Jun 12, 2025

How can you tell if steel is Corten?

1. Visual Inspection

(a) Distinctive Rust Patina

Initial Stage: Fresh Corten develops a bright orange-brown rust within days to weeks.

Mature Stage: Over 6–24 months, it forms a dense, dark brown-to-purple protective patina (stable oxide layer).

Key Difference: Ordinary steel rust flakes off (non-protective), while Corten's patina adheres tightly and stops further corrosion.

(b) Surface Texture

Corten's rust layer is even and uniform (not powdery or pitted).

Edges/corners may appear slightly darker due to accelerated oxidation.


2. Chemical Composition Analysis

Corten's alloying elements are critical. Use XRF (X-ray Fluorescence) or lab testing to verify:

Element Corten A (%) Corten B (%) Ordinary Steel (%)
Cu 0.25–0.55 0.20–0.40 <0.20
P 0.07–0.15 0.04–0.12 <0.04
Cr 0.50–1.25 0.40–0.65 <0.30
Ni – 0.40–0.65 –

Note: Corten B contains Nickel (Ni) for enhanced corrosion resistance.


3. Documentation & Markings

Mill Certificates: Check for compliance with:

ASTM A588 (U.S. standard for Corten equivalents).

EN 10025-5 (European standard, e.g., S355J0WP).

Product Labels: Corten steel may be stamped with:

Supplier name (e.g., "USS Corten").

Grade (e.g., "A588" or "COR-TEN").


4. Performance Tests

(a) Salt Spray Test (ASTM B117)

Corten shows minimal rust penetration after 100+ hours vs. ordinary steel's severe pitting.

(b) Cyclic Weathering Test

Expose samples to wet/dry cycles (e.g., 1 week UV + water spray). Corten stabilizes; ordinary steel rust progresses.


5. Common Misidentifications

Painted Steel: Scrape a small area-Corten's patina is integral, not a coating.

Galvanized Steel: Shiny zinc layer (no rust) vs. Corten's matte rust.


6. Practical Tips

Ask Suppliers: Request material certs (MTRs) with Cu/Cr/P values.

Magnet Test: Corten is magnetic (like all carbon steels).

Cost Clue: Corten costs 20–30% more than mild steel.

info-363-339info-467-376

You Might Also Like

Send Message