+8615824687445
LG700T-GJ High-Strength Steel Plate/Sheet

LG700T-GJ High-Strength Steel Plate/Sheet

Available Specifications: Thickness: 3–12 mm
Delivery Condition: Hot-rolled delivery condition.

Description

LG700T-GJ is a 700 MPa-class high-strength tempered steel developed by Liangang specifically for aerial work platforms. It is a key domestic material for lightweight upgrades in aerial work equipment.

 

As part of the high-strength steel range for construction machinery, LG700T-GJ is produced using controlled rolling and cooling followed by tempering, with microalloying elements added to its composition. This approach helps achieve a balance between high strength, cold-bending formability, weldability, and low-temperature impact toughness.

 

LG700T High Strength Steel Sheet plate

LG700T-GJ High-Strength Steel Plate/Sheet

 

LG700T-GJ High-Strength Steel Plate Product Introduction

 

Available Specifications: Thickness: 3–12 mm

 

Delivery Condition: Hot-rolled delivery condition.

 

Performance Characteristics: LG700T-GJ offers good low-temperature toughness and excellent bending and welding performance. The entire production process, from hot rolling and cross-cutting to heat treatment, is monitored to help ensure consistent material properties.

 

Mechanical Properties of LG700T-GJ High-Strength Steel Plate 

 

Grade Yield Strength /MPa Tensile Strength /MPa Elongation /%
LG700T-GJ ≥690 770–950 ≥15

 

Full Process Technology of LG700T-GJ

 

Hot Rolling Process

As the core foundational link of the whole production flow, this process adopts the Thermo-Mechanical Control Process (TMCP). By precisely regulating the initial rolling and final rolling temperatures, combined with segmented high-pressure laminar cooling, it refines the internal grains of the steel plate to the micron level. This ensures the 700MPa high-strength matrix structure from the source, avoids uneven internal stress distribution, and lays a foundation for uniform performance in subsequent processes.

 

Cross-Cutting Process

The hot-rolled steel coil enters the high-precision cross-cutting production line. A full-process online shape detection closed-loop control system is applied, through multi-roll straightening and dynamic knife gap adjustment, the flatness of the finished steel plate is strictly controlled at the industry-leading level of ≤3mm/2m. The cut plate has almost no warping or side bending, which greatly reduces the secondary straightening workload for end users.

 

Heat Treatment Process

The cross-cut steel plates are sent into the roller hearth heat treatment furnace, with a customized low-temperature tempering process. This step further homogenizes the residual stress inside the steel plate and stabilizes the mechanical properties simultaneously. The yield strength deviation at different positions of the whole plate is controlled within ±30MPa, while the low-temperature impact energy at -40℃ is stably maintained at ≥50J, which fully adapts to the extreme working conditions of aerial work vehicles.

 

Full-Process Monitoring System

Hundreds of real-time collection points are set up in the whole process from hot rolling, cross-cutting to heat treatment. Core parameters such as rolling temperature, cooling rate, straightening pressure and heat treatment holding time are monitored with full traceability, which completely avoids performance stratification and shape fluctuation of steel plates in the same batch, and realizes highly uniform performance of the whole batch of products.

 

High Strength Steel Plate

 

Why Choose LG700T-GJ High-Strength Steel Plate?

 

1.Excellent Flatness Control

Flatness deviation after cutting is ≤3 mm over a 2 m length, significantly better than typical industry standards and helping reduce the need for subsequent straightening. The plate exhibits minimal warping and virtually no lateral bending after cutting, improving processing efficiency by more than 20%.

 

2.Excellent Bending and Welding Performance

Springback is controlled within 1°, enabling precise bending and forming. Its low-carbon-equivalent design reduces susceptibility to welding cracks and makes the material suitable for automated welding production lines.

 

3.High Strength and Lightweight Design for Improved Equipment Performance

With a yield strength in the 700 MPa class, LG700T-GJ helps reduce boom weight by 10–15% while maintaining structural strength. Its good low-temperature toughness, with an impact energy of ≥50 J at −40°C, supports use in demanding operating environments.

 

High-Strength Steel Plate Application Scenarios

 

✅ Core Scenario: Aerial Work Vehicles

  • Main booms and telescopic boom sections of straight boom / articulated boom aerial work platforms
  • Structural components at boom head and boom tail, rotary platforms, vehicle chassis frames
  • High-strength load-bearing structures for scissor lifts, spider lifts, and truck-mounted aerial work platforms

 

✅ Extended Scenario: Other Construction Machinery

  • Crane boom fly jibs, telescopic booms of truck-mounted cranes
  • Lightweight structural parts for loaders and excavators
  • High-strength components for mining equipment, hydraulic supports, and electric wheel dump trucks
  • Load-bearing structures that require both high strength and low-temperature toughness, such as special containers and wind power maintenance platforms

 

How to Select Suitable LG700T-GJ High Strength Steel Plate?

 

✅ Thickness Selection

The mainstream supply range of the T-GJ series is 3~12mm.

For applications requiring thicker plates, you should choose the quenched and tempered series LG700QT / LG700QT-GLC instead.

 

✅ Distinguish from LG700L

LG700L is a dedicated automobile beam steel for vehicle frame longitudinal beams, which is completely different from LG700T-GJ. The two grades have huge differences in application scenarios, delivery state and low-temperature toughness requirements, and cannot be substituted for each other.

 

✅ Selection between LG700T-GJ and LG700QT-GLC

For 80-meter-class super high straight boom aerial work platforms that pursue extreme working height and long fatigue life, LG700QT-GLC is the optimal choice.

 

For conventional height boom structures, LG700T-GJ can fully meet the usage requirements, with more friendly cost performance.

 

✅ Welding Process Tips

Select welding consumables matching the high-strength steel grade, adopt low heat input parameters, and use multi-layer and multi-pass welding process to avoid excessive heat input reducing the base material strength.

 

‌Get the Free LG700T-GJ Mechanical Properties Brochure

Steel Plate & Sheet

 

Packing & Delivery

 

Standard Marine packing, can be customized according to customer requirements

1.Bundle 2.In Bulk 3.Water proof plastic wrap.
20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high)
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high)
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high)

 

High Strength Steel Sheets

 

Hot Tags: lg700t-gj high-strength steel plate/sheet, China lg700t-gj high-strength steel plate/sheet manufacturers, suppliers, factory

You Might Also Like

Contact Supplier