5052 aluminum sheet is an aluminum-magnesium alloy with good corrosion resistance, weldability and machinability for use in harsh environments. The alloy has high strength, especially fatigue strength, and can withstand high pressures, with fair plasticity in semi-cold work hardening and low plasticity in cold work hardening, and can be polished.
Product Introduction
5052 aluminum sheet is an aluminum-magnesium alloy with good corrosion resistance, weldability and machinability for use in harsh environments. The alloy has high strength, especially fatigue strength, and can withstand high pressures, with fair plasticity in semi-cold work hardening and low plasticity in cold work hardening, and can be polished.
Chemical Composition：
|
Aluminum Al |
balance; |
|
Silicon Si |
0.25; |
|
Copper Cu ：0.10; |
|
|
Magnesium Mg |
2.2 to 2.8; |
|
Zinc Zn |
0.10; |
|
Manganese Mn |
0.10; |
|
Chromium Cr：0.15～0.35; |
|
|
Iron Fe |
0.4. |
Technical Parameter:
|
Typical alloy |
5052 aluminum sheet |
|
Density |
2.68 g/cm3 |
|
Tensile Strength |
210 MPa |
|
Yield Strength |
83 MPa |
|
Modulus of Elasticity |
70.3 GPa |
|
Thermal Conductivity |
138 W/m-K |
|
Melting Point |
607°C (1125°F) |
|
Corrosion Resistance |
Excellent |
Scope Of Application：
The products are widely used in industry, hardware, heat dissipation, decoration, packaging, air conditioning, disinfection cabinet, transformer, road signs, signage, printing, architectural curtain wall: foyer, storefront, column decoration: tunnel wall panel decoration, furniture, interior decoration, ceiling, bar table; billboard, exhibition table; car body, yacht and machine exterior decorative plate and other industries.
Packaging Details：
Manufacturers:
GNEE company's product composition in line with the national aluminum sheet standards, aluminum sheet, rolls, plate clean, uniform thickness, length, width tolerance is small, excellent mechanical properties, can meet the different purposes of customers, welcome inquiries.
Hot Tags: 5052 aluminum plate, China 5052 aluminum plate manufacturers, suppliers, factory
